This environmentally friendly thin-wall adhesive-lined (double-wall) product is made from flame-retardant cross-linked polyolefin with an inner layer coated with hot melt adhesive.The product provides electrical insulation and mechanical protection as well as environmental sealing against moisture.DWHST is available in 2:1, 3:1 and 4:1 expansion ratios, allowing cable repair without the need to remove the connector.
This normal wall heat shrink tubing is made from a specially formulated cross-linked polyolefin.This tough, flexible, flame-retardant tubing is used for electrical insulation, wire bundling, color coding, lightweight wire harnessing, wire strain relief and wire identification purposes in a variety of home, commercial, industrial and military applications.
PETV is woven from 0.25mm (0.01') PET monofilament, cut lengthwise, and features full-length nylon hook and loop fastening straps (Velcro).This design allows for easy cable breakout and harness rework, as the cable sleeving may be easily reopened anywhere along its length, or completely removed and reattached multiple times.It provides the perfect solution for a variety of unique application challenges.
PET is woven from polyethylene terephthalate (PET) monofilament yarn.The material has a wide operating temperature range and is resistant to chemical degradation, UV radiation and abrasion.Sleeving cuts easily and cleanly with a hot knife and once installed will beautify and protect any wire, hose or cable application.
SWT is the latest technology in braided sleeving.It is a cross-split (side entry) triaxial braided sleeve made from 10/15 mil polyethylene terephthalate (PET) monofilament yarn.Lateral splitting allows the tubes to be opened to accommodate various strapping requirements, and the semi-rigid braided construction simply encloses the entire installation without the need for any additional fasteners (Velcro, tape, etc.)
25% edge overlap (nominal diameter) around push-in plugs, connectors and splices.
The surge rope is composed of an 'E' grade glass fiber yarn core and a short fiber polyester fiber braid.Polyester braid provides a dry, user-friendly sheathing that eliminates the need to directly handle fiberglass during installation.It is designed for surge ring and Specialty structural applications requiring rigid insulation and high mechanical strength materials.
Silicone rubber fiberglass sleeve is an insulating sleeve produced using a thermal process.The fiberglass surface is coated with silicone rubber; it is available in three standard voltages: 4000V – 7000V – 10000V.
It has high wear resistance, is more uniform than extruded rubber sleeves, and both types have high heat/bend resistance.
FRT fiberglass sleeving is extruded from silicone rubber into a tube, coated with a woven fiberglass sleeving, and then coated with silicone resin at high temperature.
FRT has high tensile strength and high resistance to moisture, mildew and chemical attack.
HTG fiberglass casing is made of woven fiberglass casing that is molded at high temperature, dyed, and impregnated with insulating resin.It is used in high temperature, low pressure applications and where repeated bending or extreme temperatures prohibit the use of Specialty materials.
HTG fiberglass sleeving has high tensile strength and high resistance to moisture, mildew and chemical attack.
The strapping tape is made of alkali-free glass fibers that are twisted in parallel and pre-impregnated with special thermosetting polyester resin. It is manufactured using proprietary technology and advanced equipment and is of high quality.
Self-fusing silicone bands are made from the highest quality materials and provide a permanent air and watertight seal in an emergency.It is designed for quick pipe repairs, sealing hoses on cars/trucks/boats, coating rope ends, sealing space shuttle hatches upon re-entry into Earth's atmosphere, wrapping tool handles, emergency O-ring seals, or using Wire insulation.It is resistant to fuels, acids, oils, solvents, salt water, road salt and UV rays.
The cloth-based tape is made of high-quality cloth-based cloth, covered with colored polyethylene and coated with a modified synthetic rubber resin adhesive.The pasting speed is fast, the tearing edge is straight and smooth, the tensile strength is good, and the moisture-proof performance is excellent.It's perfect for irregular surfaces.A good choice for strapping, heavy-duty cartoning, general repairs, pipe wrapping, carpet fixing, air conditioning duct seams and seam sealing, and more.
Fiberglass reinforced tape is a tape embedded with reinforced fiberglass elements for added stability, strength and reliability.The main uses of fiberglass tape are for palletizing, assembling and bundling of packaging and products.This special filament tape can withstand up to 90 pounds of tensile strength.